- "This is one of my most advanced designs! Fast, agile, and narrow attack profile. And it packs a punch."
The A/SF-01 B-wing starfighter, affectionately referred to as the B-wing or Blade Wing, was a heavily armed Rebel Alliance single-pilot starfighter and bomber manufactured by Slayn & Korpil. The B-wing saw action during the Galactic Civil War and was subsequently substituted by the B-wing Mark II.
The A/SF-01 B-wing starfighter, manufactured by Slayn & Korpil, was 16.9 meters long. The B-wing was a relatively poor dogfighter, but it was primarily designed as a "blockade buster" to attack and destroy large capital ships. As such, it was equipped with weaponry and systems normally reserved for much larger craft.
The primary airfoil took up the length of the hull, with the cylindrical cockpit at one end and a weapons pod at the other end, and an engine cluster in between. Two S-foils just below the engine on either side of the main airfoil could be extended to deploy twin laser cannons. It held a total of four laser cannons, and was also armed with proton torpedoes and ion cannons. The B-wing also had a unique gyroscopic control system that could keep the rotating cockpit module level with a horizon no matter how the body of the craft was positioned. The starfighter was equipped with a Class-2 hyperdrive and had four engines capable of reaching 950 km/h in athmosphere. The cockpit had a tactical display for the pilot as well as a targeting computer. The avionics packages were on par with those used by small capital ships. Advanced targeting systems allowed pilots to synchronize attacks across multiple B-wing fighters.
The prototype starfighter, B6, built by the Mon Calamari Quarrie featured a composite-beam laser weapon that could inflict heavy damage upon cruiser-class targets, but its range was short, and use interfered with the hyperdrive. The B6 also had a second gunner's cockpit at the opposite end of the main airfoil. Neither of these features were included with later production models, where the primary weaponry focus shifted to missiles.
The first B-wing prototype, the Prototype B6 Blade Wing, was developed by Quarrie, a Mon Calamari engineer on the planet Shantipole, as part of Project Shantipole. Several of the B-wing's distinctive features, such as the gyro-stabilized cockpit and S-foils, originated from Clone Wars era fighters such as the T-6 shuttle and the V-19 Torrent starfighter. After being won over by the spirit and piloting skill of Hera Syndulla, Quarrie awarded the prototype—and his services in improving it—to the rebellion. Sabine Wren volunteered to redesign the starfighter's weapons package, including its targeting system.
Following a successful test strike against the Galactic Empire, Bail Organa, a senator sympathetic to the rebellion, found a manufacturer that agreed to further develop the B-wing in secret. The production-line A/SF-01 B-wing starfighter was produced by Slayn & Korpil. Although Quarrie described the B6 prototype as "fast" and "agile", the production versions were anything but. Despite eliminating the heavy gunner position, associated life support systems, and composite-beam laser, the production version of the B-wing was much slower and more ponderous than the other fighters in the Alliance Fleet and the Imperial Navy. It also turned out to be tricky to fly, as the gyro-stabilized cockpit design was awkward to work with for all but the most skilled pilots. The B-wing was imagined as a potential replacement for the Y-wing fighter in its role as an assault fighter. The B-wing was primarily intended to carry a heavy weapons package with the purpose of destroying capital ships, though they proved difficult to maintain and fared poorly in dogfights. These weaknesses led to the Y-wing serving in the Alliance Fleet as late as the Battle of Jakku. The B-wing, however, turned out to be an excellent bomber and assault starfighter, provided that it was provided with enough cover from more maneuverable spacecraft.[source?]
B-wings participated in the Battle of Endor as part of the Rebel Alliance fleet. Several B-wings followed General Lando Calrissian to attack the second Death Star, but broke off when they realized that the shield was still up. Blade Squadron also participated in the battle, destroying the Star Destroyer Devastator.
Known B-wing PilotsEdit
- Yori Dahn
- Adon Fox
- Jordan Karls
- Gina Moonsong
- Ten Numb
- Cutter Poole
- Braylen Stramm
- Hera Syndulla
Behind the scenesEdit
The B-wing fighter was originally designed by Joe Johnston and Bill George for Return of the Jedi. The craft derives its name from the fact that the crew labeled the two new Rebel Alliance starfighter models in Return of the Jedi as "A fighter" and "B fighter". Bill George had so much input into the starship's development, that his colleagues nicknamed it the "Bill-Wing Fighter". Years later in Star Wars Legends the name "Blade wing" was devised as an in-universe nickname, which was canonized by the Star Wars Rebels production team.
The craft's unusually thin shape was problematic for blue-screen photography, because the model tended to blend into the star field. As a consequence, some planned sequences with the B-wing were cut from the original release of Return of the Jedi, and the B-wing is not shown in action during the Battle of Endor in the film. In fact, after the ships fly away from the still-active Death Star II shield at the start of the battle, the B-wing is hardly seen at all. The rotating cockpit design of the B-wing was based on early concept art for the Millennium Falcon.
In Star Wars Legends continuity, the B-wing was said to have been designed and produced by the Rebel Alliance after the Battle of Yavin, partly as an in-universe explanation as to why the B-wing and A-wing fighters created for Return of the Jedi did not participate in the attack on the first Death Star. However, in the new Star Wars canon, both B-wings and A-wings are featured in material taking place well before the Battle of Yavin and have been given earlier origins. The production team for the Star Wars Rebels television series, which has featured both ships, explained that the intention is to depict different rebel cells using different fighters in different parts of the galaxy. The A-wings and B-wing appear as the primary star fighters of the Phoenix Squadron in Rebels, while the rebel cell led by Jan Dodonna and portrayed in Star Wars: Episode IV A New Hope used primarily X-wings and Y-wings. The Battle of Endor, intended to show the first time the entire Rebel Alliance comes together, therefore includes both sets of ships.
- Star Wars: Galactic Defense (Picture only)
- Star Wars Rebels – "Wings of the Master"
- Star Wars: Battlefront (DLC)
- Heir to the Jedi
- Vader Down, Part I
- Star Wars: Commander
- Star Wars: Episode VI Return of the Jedi (First appearance)
- Return of the Jedi: Beware the Power of the Dark Side!
- "Blade Squadron"—Star Wars Insider 149–150
- "The Levers of Power"—The Rise of the Empire (Mentioned only)
- Shattered Empire, Part III
- "Blade Squadron: Zero Hour"—Star Wars Insider 160
- Shattered Empire, Part IV
- "Blade Squadron: Kuat"—Star Wars Insider 168
- Aftermath: Empire's End
- "Blade Squadron: Jakku"—Star Wars Insider 172
- "Scorched"—Star Wars Insider 165
- LEGO Star Wars: The Freemaker Adventures – "Home One"
- LEGO Star Wars: The Freemaker Adventures – "Trouble on Tibalt"
- LEGO Star Wars: The Force Awakens
- Ultimate Star Wars (First identified as A/SF-01 B-wing starfighter)
- Star Wars: Ships of the Galaxy
- Star Wars: Rey's Survival Guide
- Star Wars: Aliens of the Galaxy
- Entertainment Weekly's Ultimate Guide to Rogue One
- ; image #1 (of 5)
- ; image #13 (of 15)
Notes and referencesEdit
- ↑ 1.0 1.1 1.2 1.3 Ultimate Star Wars
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Star Wars Rebels – "Wings of the Master"
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 Star Wars: Episode VI Return of the Jedi
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 "Blade Squadron"—Star Wars Insider 149–150
- ↑ The events of "Wings of the Master" take place between "Empire Day," which marks the beginning of the fourth year before the Battle of Yavin; and "A Princess on Lothal," which is the first known episode to take place in the third year before the Battle of Yavin. As such, we can deduce that this episode takes place in the fourth year before the Battle of Yavin. For more information, see Wookieepedia's Timeline of Star Wars Rebels Events.
- ↑ Shattered Empire, Part IV
- ↑ https://www.youtube.com/watch?v=LI8hy3BE5eo&list=PLAnCJ5_3bOxtBvgX-Ywii_FdbHGe3S3H7&index=2
- ↑ 11.0 11.1 11.2 "Blade Squadron: Zero Hour"—Star Wars Insider 160
- ↑ Sculpting a Galaxy: Inside the Star Wars Model Shop
- ↑ Star Wars: Complete Vehicles
- B-wing on Wikipedia