- 110 Talk
-
TIE Advanced x1
Redirected from TIE X1
| |
| TIE Advanced x1 | |
|---|---|
| Production information | |
| Manufacturer | |
| Product line | |
| Model |
Twin Ion Engine Advanced x1 |
| Class | |
| Technical specifications | |
| Length | |
| Maximum acceleration |
4,150 G |
| MGLT |
105 MGLT[1] |
| Maximum speed (atmosphere) |
1,200 km/h[1] |
| Engine unit(s) |
SFS P-s5.6 twin ion engines (2)[2] |
| Hyperdrive rating |
Class 4.0[1] |
| Power plant | |
| Shielding |
Equipped |
| Hull |
Reinforced durasteel alloy |
| Navigation system |
Equipped, 10 jump limit[2] |
| Armament | |
| Crew | |
| Passengers |
None |
| Cargo capacity |
150 kilograms[1] |
| Consumables |
5 days[3] |
| Usage | |
| Role(s) |
Space superiority fighter |
| Era(s) | |
| Affiliation | |
The TIE Advanced x1, or TIE/x1 was an advanced prototype starfighter touted as a replacement for the standard TIE Fighter and tested by Darth Vader at the Battle of Yavin and used by X1 during the Battle of Mustafar. While it never made it into production, many of its best design features were later incorporated into the TIE/sa bomber and TIE/In interceptor. Further development of the Advanced continued, eventually leading to the TIE Avenger and TIE Defender.
Contents |
Characteristics
Edit
The TIE Advanced x1 featured a solar ionization reactor and paired twin ion engines like the original TIE Fighter. However, the x1 had an original spaceframe, with an elongated rear deck and reinforced durasteel-alloy hull. The x1's most important innovation was the use of "bent-wing" solar array wings, like those used on the TIE/sa bomber, which had the advantages of increased surface area for more power while also reducing the craft's profile, compared to the TIE/ln starfighter's hexagonal panel wings.
Speed was only slightly improved due to the added mass of the vessel; a good deal of the extra power was bled off to the deflector shield generators. While less maneuverable than standard TIE fighters, it was more resilient in battle.
The TIE Advanced x1 had twin heavy blaster cannons in a fixed, front-mounted position, as well as a cluster missile launcher. In addition to its shields, it had a modest hyperdrive but no life-support systems. The target tracking system was also more sophisticated than the already formidable advanced targeting system on standard TIE craft, used to overcome the extremely powerful electronic jamming used by all combat craft to defeat target lock in battle. For best performance, the targeting system of the x1 required frequent adjustment in combat.
HistoryEdit
Wishing to cut all ties with his Jedi past after his fateful duel, Darth Vader contacted Raith Sienar with a set of specifications for a new starfighter. Sienar and his team rose to the challenge and eventually presented Vader with the TIE Advanced x1 model. In 1 BBY, several months after the start of the Galactic Civil War, a renegade clone of the late Galen Marek stole Vader's TIE Advanced to escape Kamino.[4] Nonetheless, the Sith Lord was clearly pleased with the design, since he was seen flying it often afterwards, and even went to some lengths to have it recovered and repaired when damaged at the battle of Yavin 4.[5]
Armed with the references of a pleased Darth Vader, Sienar then presented his x1 to the Imperial Navy for massive usage. The Empire, however, decided not to order the TIE Advanced x1 in large quantities, citing their excessive cost. Privately, some Imperial Navy strategists admitted that the Navy was afraid to purchase a fighter with a hyperdrive, fearing that it would give bureaucrats an excuse to slash orders for new capital starships. Some also feared that hyperdrive-equipped starfighters would facilitate defections. In the end, only a few squadrons were equipped with x1's.
The few ships built were carried aboard Star Destroyers and other Imperial vessels. TIE Advanced x1s were deployed from Commander Strom's Pursuit-class light cruiser to stage an attack on the Wheel, which the Empire blamed on the Rebellion, excusing the Imperial takeover of the station.[6] Storm Squadron was known to use x1s extensively.[7] Several X1 starfighters were also in a fleet gathering observed by Admiral Kendal Ozzel and Captain Firmus Piett at some point between the former's promotion to Admiral and the latter's promotion to Admiral.[8]
The Empire instead opted for the TIE/In interceptor, which featured the TIE Advanced x1's drive system in a more compact ship. Although the TIE interceptor lacked a hyperdrive and shields, it was blindingly fast, incredibly maneuverable, and significantly cheaper than the TIE Advanced x1. By the Battle of Endor, the large increase in TIE Interceptor production meant the end of production for the TIE Advanced x1. The Advanced x1's bent-wing solar array wings were the same as the wings used on the similar but twin-hulled TIE/sa bomber.
The fighter flown by Vader at Yavin was repaired when he reached Imperial Relay Outpost V-798.[5] Vader had it with him on the Terror, while overseeing the TIE Phantom project. When the Terror was destroyed by Rebel operatives, Vader escaped in his fighter.[9] Vader again utilized his TIE Advanced x1 during the Battle of Hoth. However, his ship was damaged and rendered out of control by Rebel starfighters.[10]
It was later stowed aboard the Executor and was apparently vaporized when the ship collided with the second Death Star during the Battle of Endor, though at least one TIE Advanced x1 was involved in the space battle over the sanctuary moon.[11] One of Vader's other TIE Advanced x1 models was discovered by Jaden Korr in a hangar at Darth Vader's former stronghold on Vjun.[12] Also, the Sith Lord X1 flew such a ship during the Battle of Mustafar.[13]
By the beginning of the Yuuzhan Vong War, enough of these ships had been made that some ended up in the hands of private parties such as Lando Calrissian, who used a modified TIE Advanced x1 for entertainment purposes in the asteroid belt at Dubrillion. During the First Battle of Dubrillion, Jacen, Jaina, and Anakin Solo (Vader's grandchildren) flew three of these fighters against Yuuzhan Vong coralskippers.[14]
Behind the scenesEdit
In early blueprints for the Imperial I-class Star Destroyers, fighters known as "TIE Assault Craft" could be seen as part of the fighter complement. These bent-wing craft might have been TIE Advanced x1s with a different name or possibly a sister craft of the x1.
The size comparison chart found in the 2011 reference book Millennium Falcon Owners' Workshop Manual seems to suggest a different length for the x1. By using the well documented sizes of the Millennium Falcon and the X-wing as a scale, the resulting size is roughly 7.6 meters.
The x1 is armed with a supply of cluster missiles in its appearance in the game Rogue Leader.
The x1 appears to have navigation lights that are like fog lights.
In the 2011 science-fiction film Super 8, a model of a TIE Advanced x1 can be seen hanging in Joe's room.
AppearancesEdit
Non-canon appearancesEdit
- LEGO Star Wars: The Complete Saga
- LEGO Star Wars: The Quest for R2-D2
- Prey (Ambiguously canonical source)
- LEGO Star Wars II: The Original Trilogy
- Star Wars Infinities: A New Hope
- Tag & Bink Are Dead
- The Long, Bad Day
- Collapsing New Empires (Ambiguously canonical source)
SourcesEdit
Notes and referencesEdit
- ↑ 1.0 1.1 1.2 1.3 1.4 Star Wars: Behind the Magic
- ↑ 2.0 2.1 2.2 The Official Star Wars Fact File
- ↑ 3.0 3.1 3.2 Star Wars: Complete Cross-Sections
- ↑ Star Wars: The Force Unleashed II
- ↑ 5.0 5.1 Star Wars: Empire 14: The Savage Heart
- ↑ Star Wars 18: The Empire Strikes
- ↑ Star Wars PocketModel TCG
- ↑ The Essential Guide to Warfare
- ↑ Star Wars: Rebel Assault II: The Hidden Empire
- ↑ Star Wars Battlefront: Renegade Squadron
- ↑ ScreenThemes
- ↑ Star Wars: Jedi Knight: Jedi Academy
- ↑ Star Wars Battlefront: Elite Squadron
- ↑ Vector Prime
External linksEdit
Advanced TIE Advanced on Hyperspace (content now obsolete; backup links 1 2 on Archive.org)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
